The smart way to use rainwater: sustainable solutions for watering your garden

Water is an important and often scarce commodity, especially nowadays. Therefore, it is important to handle the precious resource carefully and above all to save drinking water wherever possible. It can be easily replaced by rainwater in certain areas. For example, when it comes to watering plants and gardens, rainwater offers a natural and cost-effective alternative. Especially in dry and hot summer periods, you can't rely on occasional rain showers to properly water your garden. Instead, you can create ways to catch the water, collect it, and then use it to water your plants.

In this blog post, we'll show you different ways to use rainwater, how to collect raindrops, and which pumps will help you get the rainwater where you need it straight away. To do this, you can find sustainable solutions to take care of your home's greenery in a more environmentally friendly way.

A man watering flowers in his garden with rainwater and the help of a garden pump.
We show you how you can use rainwater for more than just watering your garden.

Why harnessing rainwater is so beneficial

Water scarcity is far from being a brand-newnew problem. Because the population is growing steadily, not only do private households consume more water, but the demand in industry and agriculture is also increasing. This is not least due to climate change, which repeatedly manifests itself in extreme weather conditions. Temperatures are climbing higher and higher, droughts occur in summer, and the irregular and less frequent rain showers cannot cover the water demand alone. This results in groundwater levels dropping in many places – especially in areas with many sealed surfaces, where water cannot penetrate the ground. For these reasons, and many more, you should be careful with the precious resource and above all save drinking water wherever possible. This is where harnessing rainwater comes in.

Benefits of rainwater harvesting

  • Conserving resources: By using rainwater, you contribute to the sustainable use of drinking water, which is a finite resource and already dangerously scarce in some parts of the world.
  • Saving money: Rainwater falls from the sky free of charge, while drinking water must be paid for with the maintenance of piping systems, treatment plants, etc.
  • Relieving supply systems: By using less tap water, this relieves pressure on the system around the drinking water supply as well as the sewer system.
  • New groundwater: If you water lawns and plants with rainwater, it can seep into the soil, where it ultimately remains as new groundwater.

Rainwater facts

Unlike drinking water, the water naturally produced by rain does not have to be treated and therefore does not contain any chemical additives. In addition, rainwater is not mineralised, so it contains less calcium, magnesium and sodium, for example, and contains no limescale, meaning that it is very soft and pure. This makes it ideal for watering and promotes the growth of many plants.

A woman filling rainwater from a rain barrel into a watering can.
Rainwater is well-suited for plant care due to its natural properties.

Ways to collect rainwater

Before you can start putting rainwater to use, it first has to be collected. There are various ways to do this, which differ depending on the cost and capacity of your water store.

Rain barrels

A very common option that can probably be found in most garden is the rain barrel. The advantage of a rain barrel is clear: It can be placed without much preparatory work. Rain barrels are quite cheap, although they will need to be replaced eventually. In addition, you can place several barrels around your home and garden, preferably wherever a rain gutter goes into a downpipe. This allows the water that runs over the roof and is collected in the rain gutter to ultimately make its way into the rain barrel. Incidentally, you can use this principle to catch rainwater on all roof surfaces, provided you install a rain gutter – whether on the roof of your house, your garage or your garden shed. However, caution should be exercised with rain barrels in winter, as freezing water can cause them to burst. So, before the temperatures drop into minus figures, you should make sure to empty the barrel.

A woman placing a rain barrel pump with flexible gooseneck into a green rain barrel. | text: tip: pumps for rain barrels

Pumps for rain barrels

To use the collected water, you can choose a rain barrel with an integrated tap and fill it into watering cans. If you have a rain barrel without a spout, it is best to use a cordless clear water pump with a flexible gooseneck. This allows you to hang the pump on the barrel and, for example, connect the garden hose to the gooseneck or fill the water above it in watering cans.

Underground tanks

Don't want rain barrels visibly on display in your garden, but still want to collect rainwater? Then opt for underground tanks where you can collect the water and even store and use it throughout the winter. Underground tanks also have a larger volume and do not take up any space at all in the garden. The tanks are available in various designs and sizes, from flat tanks to round models, to plastic tanks or masonry tanks. Although the purchase and installation of an underground tank is significantly more expensive than the use of rain barrels, it can pay off, especially with very extensive rainwater use.

Pumps for underground tanks

Which pump you use for your tank depends less on the tank and more on how many litres of water you need where and for what. As a rule, suction pumps are used for underground tanks, i.e. surface pumps such as garden pumps or domestic waterworks, which suck in the water using a hose and pump it up with sufficient pressure. Thanks to the high delivery pressure, you can also connect lawn sprinklers directly to the pump for garden watering.

A man watering green plants in his garden with rainwater pumped by a cordless garden pump. | text: tip: pumps for tanks

If you are looking for a submersible pump for your cistern, you should look for a submersible pump, because this one works with enough pressure to be able to cope with the necessary head from the underground tank to the surface.

Rain gutters as an important supply line

Want your roof and rain gutter to serve as a supply line for your water reservoir? Then you should make sure to clean your gutters regularly so that dirty water is not collected in the rain barrel. To filter the water before it gets there, you can consider installing a pre-filter in the downpipe of your gutter. It's worth remembering that you should clear your gutters of coarse dirt and leaves after autumn and winter anyway. Incidentally, this is very easy with our cordless leaf blower and the gutter set.

A man cleaning a rain gutter with a cordless leaf blower and a gutter kit.
In order for the water to flow again, the gutter should be cleared of leaves and dirt.

Where you can use rainwater

Around the house and garden there are several options for which you can use rainwater. Primarily, you can make garden watering easier, because with the natural and soft rainwater, plants, beds, lawns, vegetable patches and orchards can be optimally watered.

Apart from that, you can also support the domestic water supply with it. To do this you need domestic waterworks. For example, you can then use rainwater to flush the toilet or in the washing machine. But be careful: Depending on where you live, it may be required by law that drinking water and rainwater run in separate piping systems. And the installation of a separate rainwater pipe involves considerable costs. So, think about where you want to use the rainwater and how much you are willing to invest in this.

A woman emptying a washing machine which is connected to a water works.
With a domestic waterworks, rainwater can also be used in the household.

Tools for garden watering

How exactly you decide to water your garden should depend on the size and structure of your garden. We have listed the most common methods of garden watering for you:

  • Lawn sprinklers: For large lawn areas, lawn sprinklers or sprinkler systems are usually used. For these systems, the connected pump should operate with a sufficiently high delivery pressure. Here, for example, a powerful garden pump is worthwhile.
  • Drip watering: A micro-drip system can be installed in flowerbeds, under hedges or perennials. With this watering system, the water only comes out in drips from small holes in the hose. This ensures that plants do not dry out.
  • Garden hoses: Garden hoses with spray gun can be found in every garden. The disadvantage of this solution is that gardeners have to make sure they regularly take care of all the watering themselves. On holiday? Without an automatic watering system, you will be dependent on the help of family, friends or neighbours.
  • Watering cans: The classic for any garden or balcony. Although watering cans are mainly used for indoor plants, the potted plants in the garden can also be watered in a targeted manner.
  • Pressure sprayers: Young plants, cuttings and freshly planted seeds in particular should be watered very carefully. Pressure sprayers are ideal for this thanks to their fine spray settings.
Picture of the author Marina Liefke.
Written by Marina Liefke
Published on 09.08.2023

Marina Liefke is an Online Editor at Einhell, where she deals with virtually all texts related to tools, garden equipment, and accessories. She acquires the necessary know-how through practical product training and close collaboration with the Einhell product managers. Her favorite tool is the PRESSITO cordless compressor because when the air is running out, it pumps it right back in.